Skip to main content

Thread: 64GB SSD and 2x3TB RAID0 ISSUE after installation


i installed ubuntu 12.04 desktop on 64gb ssd without problems.

configured via onboard raid 2 identical 3tb drives operate raid0 @ 128 stripe @ max size.

once ubuntu booted up, goto disk utility , shows 3 drives on sata host adapter [raid mode] showing too. reports each drive 3tb 3tb , 64gb expected. however, under peripheral devices 1.6tb hard drive appears.

@ time of installation when had option chose disk install to, noticed reported 1.6tb drive , 64gb ssd.

plan install os on ssd , use raid0 2x3tb drives file storage.

when un-raid 2 3tbs 1.6tb disk goes away...

how can ubuntu recognize raid array 6tb should?



Forum The Ubuntu Forum Community Ubuntu Official Flavours Support Installation & Upgrades [ubuntu] 64GB SSD and 2x3TB RAID0 ISSUE after installation


Ubuntu

Comments

Post a Comment

Popular posts from this blog

Thread: Can not create raid array: mdadm: no raid-devices specified.

Image
hello! i'm trying setup software raid on server, fail @ first step: code: root@sandnabba:/root# mdadm -c /dev/md0 -c512 -l5 /dev/sdc1 /dev/sdd1 /dev/sde1 mdadm: no raid-devices specified. what doing wrong!? are sure -c equivalent --create? also, think need space after -c , -l options, value shouldn't command, or should have = between. @ man pages mdadm , double check spelling. Forum The Ubuntu Forum Community Ubuntu Specialised Support Ubuntu Servers, Cloud and Juju Server Platforms [SOLVED] Can not create raid array: mdadm: no raid-devices specified. Ubuntu
Read more

Thread: HOW TO: Package and theme GTK+ / Gtkmm apps in Linux for Windows

hi, if developing platform independent software in linux using gtk+/gtkmm , you've managed cross compile windows, guide you. i'm posting because after researching topic myself, encountered many posts people have abandoned gtk+/gtkmm wxwidgets because of gtks ugly default appearance in windows/wine. gtk+ themeable in windows/wine gnome. have set correctly . . . here's how. guide gtkmm gtk+ similar. (1) firstly, download , install gtkmm windows using wine. (you have if have cross compiled app windows) https://live.gnome.org/gtkmm/mswindows (2) run these commands create proper directory structure. (substitute 'proj' whatever project called) mkdir ~/proj mkdir ~/proj/bin mkdir ~/proj/etc mkdir ~/proj/etc/gtk-2.0 mkdir ~/proj/lib mkdir ~/proj/lib/gtk-2.0 mkdir ~/proj/lib/gtk-2.0/2.10.0 mkdir ~/proj/lib/gtk-2.0/2.10.0/engines mkdir ~/proj/share mkdir ~/proj/share/themes (3) move directory gtkmm installed (probably ~/.wine/drive
Read more

Thread: Twinview issues

hi all, recovered white screen of death having reinstalling nvidia drivers via command line in recovery mode. when rebooted after that, fine, except 1 of monitors not displaying anything. ran sudo nvidia xconfig, created conf file me, issue not resolved. in x server settings, secondary monitor (the 1 not displaying), detected , enabled in twinview, resolution not detected , screen black. if try switching workspaces, little window showing workspaces show second monitor sitting next monitor, same in x server settings. options have resolving this? lot! Forum The Ubuntu Forum Community Ubuntu Official Flavours Support Desktop Environments [ubuntu] Twinview issues Ubuntu
Read more