Skip to main content

Thread: wirless is disabled on my system


when ran commmands sudo lshw -c network output
*-network disabled
description: wireless interface
product: pro/wireless 3945abg [golan] network connection
vendor: intel corporation
physical id: 0
bus info: pci@0000:05:00.0
logical name: wlan0
version: 02
serial: 00:18:de:7f:42:50
width: 32 bits
clock: 33mhz
capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless
configuration: broadcast=yes driver=iwl3945 driverversion=2.6.35-32-generic firmware=n/a latency=0 link=yes multicast=yes wireless=ieee 802.11abg
resources: irq:44 memory:d4000000-d4000fff
*-network
description: ethernet interface
product: pro/100 ve network connection
vendor: intel corporation
physical id: 8
bus info: pci@0000:08:08.0
logical name: eth0
version: 02
serial: 00:16:d3:97:77:8f
size: 10mb/s
capacity: 100mb/s
width: 32 bits
clock: 33mhz
capabilities: pm bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=e100 driverversion=3.5.24-k2-napi duplex=half firmware=n/a latency=66 link=no maxlatency=56 mingnt=8 multicast=yes port=mii speed=10mb/s
resources: irq:20 memory:d4100000-d4100fff ioport:3000(size=64)


sudo iwlist scan

lo interface doesn't support scanning.

eth0 interface doesn't support scanning.

wlan0 interface doesn't support scanning : network down

ppp0 interface doesn't support scanning.

please me make work wirless.thanks
using hp pavilion dv2000 , ubuntu 10.10(maverick)

open terminal , this

code:
sudo rfkill unblock wifi
, try again .


Forum The Ubuntu Forum Community Ubuntu Official Flavours Support Networking & Wireless [SOLVED] wirless is disabled on my system


Ubuntu

Comments

Post a Comment

Popular posts from this blog

Thread: Can not create raid array: mdadm: no raid-devices specified.

Image
hello! i'm trying setup software raid on server, fail @ first step: code: root@sandnabba:/root# mdadm -c /dev/md0 -c512 -l5 /dev/sdc1 /dev/sdd1 /dev/sde1 mdadm: no raid-devices specified. what doing wrong!? are sure -c equivalent --create? also, think need space after -c , -l options, value shouldn't command, or should have = between. @ man pages mdadm , double check spelling. Forum The Ubuntu Forum Community Ubuntu Specialised Support Ubuntu Servers, Cloud and Juju Server Platforms [SOLVED] Can not create raid array: mdadm: no raid-devices specified. Ubuntu
Read more

Thread: HOW TO: Package and theme GTK+ / Gtkmm apps in Linux for Windows

hi, if developing platform independent software in linux using gtk+/gtkmm , you've managed cross compile windows, guide you. i'm posting because after researching topic myself, encountered many posts people have abandoned gtk+/gtkmm wxwidgets because of gtks ugly default appearance in windows/wine. gtk+ themeable in windows/wine gnome. have set correctly . . . here's how. guide gtkmm gtk+ similar. (1) firstly, download , install gtkmm windows using wine. (you have if have cross compiled app windows) https://live.gnome.org/gtkmm/mswindows (2) run these commands create proper directory structure. (substitute 'proj' whatever project called) mkdir ~/proj mkdir ~/proj/bin mkdir ~/proj/etc mkdir ~/proj/etc/gtk-2.0 mkdir ~/proj/lib mkdir ~/proj/lib/gtk-2.0 mkdir ~/proj/lib/gtk-2.0/2.10.0 mkdir ~/proj/lib/gtk-2.0/2.10.0/engines mkdir ~/proj/share mkdir ~/proj/share/themes (3) move directory gtkmm installed (probably ~/.wine/drive...
Read more

Thread: Twinview issues

hi all, recovered white screen of death having reinstalling nvidia drivers via command line in recovery mode. when rebooted after that, fine, except 1 of monitors not displaying anything. ran sudo nvidia xconfig, created conf file me, issue not resolved. in x server settings, secondary monitor (the 1 not displaying), detected , enabled in twinview, resolution not detected , screen black. if try switching workspaces, little window showing workspaces show second monitor sitting next monitor, same in x server settings. options have resolving this? lot! Forum The Ubuntu Forum Community Ubuntu Official Flavours Support Desktop Environments [ubuntu] Twinview issues Ubuntu
Read more